RFC du protocole HTTP : Safe and Idempotent Methods
9.0 Method Definitions
The set of common methods for HTTP/1.1 is defined below. Although
this set can be expanded, additional methods cannot be assumed to
share the same semantics for separately extended clients and servers.
The Host request-header field (section 14.23) MUST accompany all
HTTP/1.1 requests.
9.1. Safe and Idempotent Methods
9.1.1. Safe Methods
Implementors should be aware that the software represents the user in
their interactions over the Internet, and should be careful to allow
the user to be aware of any actions they might take which may have an
unexpected significance to themselves or others.
In particular, the convention has been established that the GET and
HEAD methods SHOULD NOT have the significance of taking an action
other than retrieval. These methods ought to be considered "safe".
This allows user agents to represent other methods, such as POST, PUT
and DELETE, in a special way, so that the user is made aware of the
fact that a possibly unsafe action is being requested.
Naturally, it is not possible to ensure that the server does not
generate side-effects as a result of performing a GET request; in
fact, some dynamic resources consider that a feature. The important
distinction here is that the user did not request the side-effects,
so therefore cannot be held accountable for them.
9.1.2. Idempotent Methods
Methods can also have the property of "idempotence" in that (aside
from error or expiration issues) the side-effects of N > 0 identical
requests is the same as for a single request. The methods GET, HEAD,
PUT and DELETE share this property. Also, the methods OPTIONS and
TRACE SHOULD NOT have side effects, and so are inherently idempotent.
However, it is possible that a sequence of several requests is non-
idempotent, even if all of the methods executed in that sequence are
idempotent. (A sequence is idempotent if a single execution of the
entire sequence always yields a result that is not changed by a
reexecution of all, or part, of that sequence.) For example, a
sequence is non-idempotent if its result depends on a value that is
later modified in the same sequence.
A sequence that never has side effects is idempotent, by definition
(provided that no concurrent operations are being executed on the
same set of resources).
9.2. OPTIONS
The OPTIONS method represents a request for information about the
communication options available on the request/response chain
identified by the Request-URI. This method allows the client to
determine the options and/or requirements associated with a resource,
or the capabilities of a server, without implying a resource action
or initiating a resource retrieval.
Responses to this method are not cacheable.
If the OPTIONS request includes an entity-body (as indicated by the
presence of Content-Length or Transfer-Encoding), then the media type
MUST be indicated by a Content-Type field. Although this
specification does not define any use for such a body, future
extensions to HTTP might use the OPTIONS body to make more detailed
queries on the server. A server that does not support such an
extension MAY discard the request body.
If the Request-URI is an asterisk ("*"), the OPTIONS request is
intended to apply to the server in general rather than to a specific
resource. Since a server's communication options typically depend on
the resource, the "*" request is only useful as a "ping" or "no-op"
type of method; it does nothing beyond allowing the client to test
the capabilities of the server. For example, this can be used to test
a proxy for HTTP/1.1 compliance (or lack thereof).
If the Request-URI is not an asterisk, the OPTIONS request applies
only to the options that are available when communicating with that
resource.
A 200 response SHOULD include any header fields that indicate
optional features implemented by the server and applicable to that
resource (e.g., Allow), possibly including extensions not defined by
this specification. The response body, if any, SHOULD also include
information about the communication options. The format for such a
body is not defined by this specification, but might be defined by
future extensions to HTTP. Content negotiation MAY be used to select
the appropriate response format. If no response body is included, the
response MUST include a Content-Length field with a field-value of
"0".
The Max-Forwards request-header field MAY be used to target a
specific proxy in the request chain. When a proxy receives an OPTIONS
request on an absoluteURI for which request forwarding is permitted,
the proxy MUST check for a Max-Forwards field. If the Max-Forwards
field-value is zero ("0"), the proxy MUST NOT forward the message;
instead, the proxy SHOULD respond with its own communication options.
If the Max-Forwards field-value is an integer greater than zero, the
proxy MUST decrement the field-value when it forwards the request. If
no Max-Forwards field is present in the request, then the forwarded
request MUST NOT include a Max-Forwards field.
9.3. GET
The GET method means retrieve whatever information (in the form of an
entity) is identified by the Request-URI. If the Request-URI refers
to a data-producing process, it is the produced data which shall be
returned as the entity in the response and not the source text of the
process, unless that text happens to be the output of the process.
The semantics of the GET method change to a "conditional GET" if the
request message includes an If-Modified-Since, If-Unmodified-Since,
If-Match, If-None-Match, or If-Range header field. A conditional GET
method requests that the entity be transferred only under the
circumstances described by the conditional header field(s). The
conditional GET method is intended to reduce unnecessary network
usage by allowing cached entities to be refreshed without requiring
multiple requests or transferring data already held by the client.
The semantics of the GET method change to a "partial GET" if the
request message includes a Range header field. A partial GET requests
that only part of the entity be transferred, as described in section
14.35. The partial GET method is intended to reduce unnecessary
network usage by allowing partially-retrieved entities to be
completed without transferring data already held by the client.
The response to a GET request is cacheable if and only if it meets
the requirements for HTTP caching described in section 13.
See section 15.1.3 for security considerations when used for forms.
9.4. HEAD
The HEAD method is identical to GET except that the server MUST NOT
return a message-body in the response. The metainformation contained
in the HTTP headers in response to a HEAD request SHOULD be identical
to the information sent in response to a GET request. This method can
be used for obtaining metainformation about the entity implied by the
request without transferring the entity-body itself. This method is
often used for testing hypertext links for validity, accessibility,
and recent modification.
The response to a HEAD request MAY be cacheable in the sense that the
information contained in the response MAY be used to update a
previously cached entity from that resource. If the new field values
indicate that the cached entity differs from the current entity (as
would be indicated by a change in Content-Length, Content-MD5, ETag
or Last-Modified), then the cache MUST treat the cache entry as
stale.
9.5. POST
The POST method is used to request that the origin server accept the
entity enclosed in the request as a new subordinate of the resource
identified by the Request-URI in the Request-Line. POST is designed
to allow a uniform method to cover the following functions:
- Annotation of existing resources;
- Posting a message to a bulletin board, newsgroup, mailing list,
or similar group of articles;
- Providing a block of data, such as the result of submitting a
form, to a data-handling process;
- Extending a database through an append operation.
The actual function performed by the POST method is determined by the
server and is usually dependent on the Request-URI. The posted entity
is subordinate to that URI in the same way that a file is subordinate
to a directory containing it, a news article is subordinate to a
newsgroup to which it is posted, or a record is subordinate to a
database.
The action performed by the POST method might not result in a
resource that can be identified by a URI. In this case, either 200
(OK) or 204 (No Content) is the appropriate response status,
depending on whether or not the response includes an entity that
describes the result.
If a resource has been created on the origin server, the response
SHOULD be 201 (Created) and contain an entity which describes the
status of the request and refers to the new resource, and a Location
header (see section 14.30).
Responses to this method are not cacheable, unless the response
includes appropriate Cache-Control or Expires header fields. However,
the 303 (See Other) response can be used to direct the user agent to
retrieve a cacheable resource.
POST requests MUST obey the message transmission requirements set out
in section 8.2.
See section 15.1.3 for security considerations.
9.6. PUT
The PUT method requests that the enclosed entity be stored under the
supplied Request-URI. If the Request-URI refers to an already
existing resource, the enclosed entity SHOULD be considered as a
modified version of the one residing on the origin server. If the
Request-URI does not point to an existing resource, and that URI is
capable of being defined as a new resource by the requesting user
agent, the origin server can create the resource with that URI. If a
new resource is created, the origin server MUST inform the user agent
via the 201 (Created) response. If an existing resource is modified,
either the 200 (OK) or 204 (No Content) response codes SHOULD be sent
to indicate successful completion of the request. If the resource
could not be created or modified with the Request-URI, an appropriate
error response SHOULD be given that reflects the nature of the
problem. The recipient of the entity MUST NOT ignore any Content-*
(e.g. Content-Range) headers that it does not understand or implement
and MUST return a 501 (Not Implemented) response in such cases.
If the request passes through a cache and the Request-URI identifies
one or more currently cached entities, those entries SHOULD be
treated as stale. Responses to this method are not cacheable.
The fundamental difference between the POST and PUT requests is
reflected in the different meaning of the Request-URI. The URI in a
POST request identifies the resource that will handle the enclosed
entity. That resource might be a data-accepting process, a gateway to
some other protocol, or a separate entity that accepts annotations.
In contrast, the URI in a PUT request identifies the entity enclosed
with the request -- the user agent knows what URI is intended and the
server MUST NOT attempt to apply the request to some other resource.
If the server desires that the request be applied to a different URI,
it MUST send a 301 (Moved Permanently) response; the user agent MAY
then make its own decision regarding whether or not to redirect the
request.
A single resource MAY be identified by many different URIs. For
example, an article might have a URI for identifying "the current
version" which is separate from the URI identifying each particular
version. In this case, a PUT request on a general URI might result in
several other URIs being defined by the origin server.
HTTP/1.1 does not define how a PUT method affects the state of an
origin server.
PUT requests MUST obey the message transmission requirements set out
in section 8.2.
Unless otherwise specified for a particular entity-header, the
entity-headers in the PUT request SHOULD be applied to the resource
created or modified by the PUT.
9.7. DELETE
The DELETE method requests that the origin server delete the resource
identified by the Request-URI. This method MAY be overridden by human
intervention (or other means) on the origin server. The client cannot
be guaranteed that the operation has been carried out, even if the
status code returned from the origin server indicates that the action
has been completed successfully. However, the server SHOULD NOT
indicate success unless, at the time the response is given, it
intends to delete the resource or move it to an inaccessible
location.
A successful response SHOULD be 200 (OK) if the response includes an
entity describing the status, 202 (Accepted) if the action has not
yet been enacted, or 204 (No Content) if the action has been enacted
but the response does not include an entity.
If the request passes through a cache and the Request-URI identifies
one or more currently cached entities, those entries SHOULD be
treated as stale. Responses to this method are not cacheable.
9.8. TRACE
The TRACE method is used to invoke a remote, application-layer loop-
back of the request message. The final recipient of the request
SHOULD reflect the message received back to the client as the
entity-body of a 200 (OK) response. The final recipient is either the
origin server or the first proxy or gateway to receive a Max-Forwards
value of zero (0) in the request (see section 14.31). A TRACE request
MUST NOT include an entity.
TRACE allows the client to see what is being received at the other
end of the request chain and use that data for testing or diagnostic
information. The value of the Via header field (section 14.45) is of
particular interest, since it acts as a trace of the request chain.
Use of the Max-Forwards header field allows the client to limit the
length of the request chain, which is useful for testing a chain of
proxies forwarding messages in an infinite loop.
If the request is valid, the response SHOULD contain the entire
request message in the entity-body, with a Content-Type of
"message/http". Responses to this method MUST NOT be cached.
9.9. CONNECT
This specification reserves the method name CONNECT for use with a
proxy that can dynamically switch to being a tunnel (e.g. SSL
tunneling [44]).
|